Flush – Deck mounted panels with invisible cable

FLUSH Solar panels

The preferred choice for deck fitting.

With no junction box the Flush model is the preferred choice for deck fittings.

Enabled by a flat cable with a minimal outside and maximized inside featuring 16 AWG wires. As on the other models the wires are pre tinned for the lowest resistance and longevity.

SUNBEAMsystem Flush is available both with Standard surface and as the more durable Tough-Flush with anti-skid surface.

 

STANDARD models available with the FLUSH choice

SP18f SP30f SP50f
Article# Pmax Voc Isc Vmp Imp Weight Size (in)
SP18f 18W 23.7V 0.99A 19.4V 0.92A 0.8 lbs 17.1 x 10.9
SP30f 30W 21.2V 1.83A 17.6V 1.70A 1.3 lbs 21.1 x 14.9
SP50f 50W 21.2V 3.05A 17.6V 2.84A 2 lbs 21.5 x 21.1

 

TOUGH models available with the FLUSH choice

T18fl T18f T30f
 SUNBEAMsystem 70W Tough Flush T70f  
T50f T70f T100f
Article# Pmax Voc Isc Vmp Imp Weight Size (mm)
T18f /T18fl 18W 23.7V 0.99A 19.4V 0.92A 0.8 lbs 17.1 x 10.9 / 5.9 x 33.5
T30f 30W 21.2V 1.83A 17.6V 1.70A 1.3 lbs 14.9 x 21.1
T50f/ T50fblack 50W 21.2V 3.05A 17.6V 2.84A 2 lbs 21.5 x 21.1
T70f/ T70fblack 70W 22.1V 4.26A 17.6V 3.98A 3.5 lbs 30.6 x 21.3
T100f 100W 21.6V 5.97A 17.8V 5.62A 4 lbs 41.7 x 21.3

For fitting use the stainless steel grommets or preferably use a flexible glue like Sikaflex-291. Some glue along the outer edge is usually sufficient for a permanent bond. but make sure to put some extra around the cable to even out the support under the panel.