Solar Panels

SUNBEAMsystem solar panels are available in different models and with extra features.

Classic

Low price and  slightly larger measurements.

Nordic

Balance between innovation and price.

Tough & Tough+

Long life and high efficiency



TOUGH+ Solar panels

State of the art

SUNBEAMsystem Tough+ represent the absolute latest technology to be found. Both in the incredible amount of power per surface unit, as well as the longevity compared to other lightweight competitors. The unrivalled power output is safeguarded by our partner Sunpower. The cells inside a Tough+ panel have a stunning efficiency of 23.7% on average, resulting in a 13% higher output ever available ahead of the launch of Tough+.

Tough+ features the same superior materials developed by SUNBEAMsystem for the original Tough series. Allowing a longevity never seen earlier for light and thin solar panels. The anti-slip surface is not only practical when fitted on a yacht but is also better at catching light early and late in the day. The dirt repelling properties will keep up the power production by helping to keep the panel clean.

  • 13% more power
  • Very Flat Flush 2.0 Cable
  • Easy installation
  • UV-Proof Anti-Slip Surface
  • 5-year warranty

Tough+ is only available with the Flush 2.0 supplemental and is designed for screw-less mounting. The result is a flush, low-rise surface, ideal for integrating the panels on any surface. The improved Flush 2.0 power cable is 30% flatter but still features 25% more copper cross-section than its predecessor. All Tough+ models include a full size structural bonding tape, for quick mounting on a curved surface. For a slow curing alternative we recommend to use a white adhesive like Sikaflex 291

 

5 years workmanship warranty is standard on all Tough surface models.

 

 

     
Tough+ 38w Flush Tough+ 56W Flush Tough+ 80W Flush Tough+ 113W Flush
TP38F 38W 23.6V 2.2A 17.6V 2.15A 0.7 kg 378 x 535
TP56F2 56W 23.6V 3.3A 17.6V 3.18A 1 kg  545 x 535
TP80F 80W 23.6V 4.67A 17.6V 4.54A 1.5 kg 778 x 535
TP113F 113W 23.6V 6.62A 17.6V 6.42A 2.0 kg 1060 x 540

The Tough surface will make the panel somewhat stiffer than the standard version. We recommend half the normal bending for all Tough models.

Flush models are meant for structural fitting and not for temporary use, neither on canvas.

 

SUNBEAMsystem TOUGH+ does always come with the following supplements:

 
Structural Bond

Attachment

Flush 2.0

Junction Box Less

 



TOUGH Solar panels

Long life and high efficiency

SUNBEAMsystem is a multiple test winner, simply because it is designed to be superior in every detail. It is a reliable source of power in even the most demanding conditions and is fitted with high efficiency Sunpower cells (22.5%).

Due to the impressive specifications the Tough models are often used in the yachting industry, but also in industrial off-grid systems. The surface of the Tough series is extremely durable and will sustain high UV-radiation for a long time. It has a better light transmission than ordinary materials which will improve the overall performance. The surface structure adds anti-slip properties but will also improve power production at low solar angles.

  • Flush Fitting
  • Small Size & High Power
  • Improved Partial Shading
  • UV-Proof Surface
  • 5-year warranty

The Tough in sizes 50, 70 and 100 Watt have a physical cell arrangement contributing to an increased partial shading production not found on other brands. The Flush option with the flat low-loss cable (without junction box) offers a superior solution for structural mounting. The anti-slip surface ensures a safe surface to walk on, and being only 3mm thin, models with the Tough surface are the perfect solution for permanent mounting on yacht decks.

5 years workmanship warranty is standard on all Tough surface models.

Tough 18w L Flush Tough 18W Flush Tough 30W Flush Tough 50W Flush
Tough 50w Flush Bl Tough 70W Flush Tough 70W Flush Bl Tough 100W Flush
Article# Pmax Voc Isc Vmp Imp Weight Size (mm)
T18F /T18LF 18W 23.7V 0.99A 19.4V 0.92A 0.3 kg 434 x 277 / 147 x 850
T30F 30W 21.2V 1.83A 17.6V 1.70A 0.7 kg 378 x 535
T50F2 50W 21.2V 3.05A 17.6V 2.84A 1 kg  545 x 535
T70F 70W 22.1V 4.26A 17.6V 3.98A 1.5 kg 778 x 535
T100F 100W 21.6V 5.97A 17.8V 5.62A 2.0 kg 1060 x 540

The Tough surface will make the panel somewhat stiffer than the standard version. We recommend half the normal bending for all Tough models.

SUNBEAMsystem TOUGH is available with the following supplements:

Black

Black Design

Flush

Junction Box Less

JBox

With a minimal Junction Box

QuickFix/Sunzip

For semi-permanent fitting on Canvas


NORDIC Solar Panels

The perfect balance between innovation and price.

 

Nordic offers compact yet powerful solar panels of which all details are designed for the demanding conditions at sea.

All Nordic models feature our arrangement for better partial shading power output, not found on competitors.

The Nordic models with the Flush supplemental offers a superior integration on any surface. The lack of screw holes results in a discreet glued installation. We recommend the use of white Sikaflex 291, Simson MSR CA or structural bonding tape for installation.

The 50W Junction Box model features 2.5mm2 pre-tinned solar cables fitted with MC4 connectors (IP67).

  • Powerful & Compact
  • Improved Partial Shading
  • Available in Flush
  • Walkable
 Nordic 50W Flush Nordic 50W JB Nordic 50W Flush
Article# Pmax Voc Isc Vmp Imp Weight Size (mm)
N50F 50W 21.2V 3.05A 17.6V 2.84A 1 kg 545 x 535
N50JB 50W 21.2V 3.05A 17.6V 2.84A 1 kg 555 x 535
N100F 100W 21.6V 5.97A 17.6V 5,62A 2 kg 1060×540

100W panel is not intended for temporary use or on top of canvas. We recommend the T50QF or SP50JB

For permanent fitting  use a flexible glue like Sikaflex-291. Some glue along the outer edge is usually sufficient for a permanent bond.

SUNBEAMsystem Nordic is available with the following supplementals:

Flush

Junction Box Less

JBox

With a minimal Junction Box

 


CLASSIC Flexible Solar Panel

With a minimal price.

SUNBEAMsystem CLASSIC features slightly larger cells than our other models. This makes the panel somewhat longer but still smaller than most competitors. The award winning production abilities in reality are still present. A SUNBEAMsystem Classic panel will produce more energy than an older competitor with the same wattage.

Clean design and a high finish. White color behind dark cells with no visible internal wires.

All panels are made to endure tough marine environments with quality down to the detail.

  • Flexible 60o/m
  • 3mm Thin
  • Light weight
  • Walkable
C50JB C100JB
Article# Pmax Voc Isc Vmp Imp Weight Size (mm)
C50JB 50W 23.4V 2.71A 19.8V 2.53A 1.0 kg 622 x 535
C100JB 100W 23.4V 5.42A 19.8V 5.06A 1.9 kg 1185 x 540

Classic panels are equipped with a minimal junction box as well as with 2.5mm2 pre tinned cable and IP67 classed MC4 connectors.

C100 is not intended for temporary use or on top of canvas. We recommend the T50QF or C50

For permanent fitting use the stainless steel grommets or preferably use a flexible glue like Sikaflex-291. Some glue along the outer edge is usually sufficient for a permanent bond.

 


Supplement: BLACK TOUGH

Discrete design

 

Now our most popular models are available in a Black edition (T50f-black och T70f-black)

SUNBEAMsystem Tough Black corner2

The Black Solar Panel is the most discrete to be found among our models. Thanks to FLUSH the connection can be kept hidden as well.

The only technical difference to our other TOUGH FLUSH models is the black backside providing the dark looks.

 


Supplement: FLUSH

The preferred choice for deck fitting.

With no junction box the Flush model is the preferred choice for deck fittings.

Enabled by a flat cable with a minimal outside and maximized inside featuring 2×1.6mm2 wires. As on the other models the wires are pre tinned for the lowest resistance and longevity. The outer core is UV-proof.

SUNBEAMsystem flush wide

SUNBEAMsystem Flush is available on both Nordic and Tough models .

For fitting use the stainless steel grommets or preferably use a flexible glue like Sikaflex-291. Some glue along the outer edge is usually sufficient for a permanent bond. but make sure to put some extra around the cable to even out the support under the panel.

 


Supplement: FLUSH 2.0

The preferred choice for deck fitting.

FLUSH 2.0 is only available on Tough+ models.

Only 1.4mm thin yet featuring an impressive 2 x 2.2mm2  inner core wires.

Pre tinned copper and UV-proof casing

 

Tough+ includes a structural bonding tape by 3M making a permanent bonding very fast and simple.  If one chooses to use glue we recommend the use a flexible glue like Sikaflex-291. Some glue along the outer edge is usually sufficient for a permanent bond. but make sure to put some extra around the cable to even out the support under the panel.


Supplement: JBox

Simple connection with water proof connectors

A minimal Junction Box with low loss pretinned 2,5mm2 cables and IP67 classed MC4 connectors.

 

Available accessories are MC4-connectors and cables for a complete connection to the regulator. If connecting two panels in parallel, use MC4 T-connectors.

JBox is available for models Classic, Standard and Tough.

 

 


Supplement: QuickFix

Semi-permanent attachment on any surface.

SUNBEAMsystem QuickFix with locked snap fasteners – German made LOXXTM in stainless steel. Used with the corresponding LOXX product for canvas or hard surface. The solar panel will semi-permanently attach and only be moved by choice.

50w loxx canvas sunbeamsystem-2 (Large)wide

SUNBEAMsystem QuickFix is available with both Tough and Standard surface. The Tough surface features a longer life expectancy than traditional materials. The light transmittance of the surface is higher than pure glass resulting in slightly higher performance of the solar panel.

If the intended use is a bimini or canvas on a fast going motorboat. We recommend that you choose to add the Sunzip backside which will distribute the forces on the canvas in heavy wind.

Equipped with a minimal junction box as well as with 2.5mm2 pre tinned cable and IP67 classed MC4 connectors.

Ad MC4-connectors and cables for a complete connection to the regulator. When connecting two panels in parallel, use MC4 T-connectors.

Continue to the SunZip section below for product data..

 

Supplement: SunZip – Velcro attachment

Semi-permanent attachment on canvas – for use in heavy winds.

SUNBEAMsystem Sunzip uses VELCRO for a safe canvas attachment tested in up to 50 knots wind. Sunzip is a backside made in SUNBRELLATM added to SUNBEAMsystem Tough QuickFix 50W or SUNBEAMsystem QuickFix 50W

Sunzip solar panel for bimini wide

SUNBEAMsystem QuickFix 50W (with the Sunzip cushion) is available with both Tough and Standard surface. The Tough surface features a longer life expectancy than traditional materials. The light transmittance of the surface is higher than pure glass resulting in slightly higher performance of the solar panel.

Sunzip includes the Velcro part for sewing onto your canvas. The cushion measures 57x59cm.

Equipped with a minimal junction box as well as with 2.5mm2 pre tinned cable and IP67 classed MC4 connectors.

Sunzip closeup wide

Ad MC4-connectors and cables for a complete connection to the regulator. If connecting two panels in parallel, use MC4 T-connectors.

 

T50QF
Article# Pmax Voc Isc Vmp Imp Weight Size(mm)
T50QF 50W 21.2V 3.05A 17.6V 2.84A 0.9 kg 555 x 535

Acessories for quick fitting the panel on a hard surface or canvas

DSC01231 (Small)
Standard Stainless plate Loxx for Canvas SunZip Back