Flush – Deck mounted panels with invisible cable


Supplement: FLUSH

The preferred choice for deck fitting.

With no junction box the Flush model is the preferred choice for deck fittings.

Enabled by a flat cable with a minimal outside and maximized inside featuring 2×1.6mm2 wires. As on the other models the wires are pre tinned for the lowest resistance and longevity. The outer core is UV-proof.

SUNBEAMsystem flush wide

SUNBEAMsystem Flush is available on both Nordic and Tough models .

For fitting use the stainless steel grommets or preferably use a flexible glue like Sikaflex-291. Some glue along the outer edge is usually sufficient for a permanent bond. but make sure to put some extra around the cable to even out the support under the panel.


Supplement: FLUSH 2.0

The preferred choice for deck fitting.

FLUSH 2.0 is only available on Tough+ models.

Only 1.4mm thin yet featuring an impressive 2 x 2.2mm2  inner core wires.

Pre tinned copper and UV-proof casing

Tough+ includes a structural bonding tape by 3M making a permanent bonding very fast and simple.  If one chooses to use glue we recommend the use a flexible glue like Sikaflex-291. Some glue along the outer edge is usually sufficient for a permanent bond. but make sure to put some extra around the cable to even out the support under the panel.